Fz1200 R33 Kf2 C A Durable Igbt For Motor Control}

Submitted by: DAVID SMITH

If you decide to use FZ1200R33KF2C in your traction and industrial applications, you do not have to worry about performance and reliability. FZ1200R33KF2C is a 3300V/1200A IHV 190mm single switch IGBT diode-inverter with IGBT2. Its weight is 8.82 lbs. It is a switch that is used in order to allow power flow in the on state and to stop power flow when it is in the off state. It works by applying voltage to a semiconductor component, therefore changing its properties to block or create an electrical path. You will be more than satisfied with its build quality. The module is very sturdy and highly dependable. It is manufactured by Infineon Technologies AG, a prominent semiconductor supplier from Germany. Infineon is famous for their sophisticated product lineup, which addresses three central challenges to the modern society: energy efficiency, mobility, and security. Eupec is the previous name of Infineon Technologies.

FZ1200R33KF2C features high energy consistency for compact inverter models. Its housing is standardized too. It is an IGBT device that combines the voltage characteristics of a biopolar transistor (collector emitter) and the drive characteristics of a MOSFET. The target applications of FZ1200R33KF2C are Motor Control and Drives, Railway Traction, Wind Energy Systems, Commercial, Agriculture and Construction Vehicles (CAV) etc.

In today’s competitive & dynamic environment, there is a continuous pressure to find new methods to increase energy efficiency, mobility and security in all motor control applications. At the same time, software’s progressively important role in systems directly contributes to their complexity and increases costs. Today’s motors are increasingly driven via electronic controls, which provide better control of speed, position, and torque, as well as much better efficiency, rather than via direct connection to their source of power (whether AC or DC). To do this, the motor-control circuit must switch the current flow to the motor’s coils on and off quickly, with minimal switching-time or conduction-period losses in the switch itself. That’s where FZ1200R33KF2C is used. This semiconductor device serves the needs of motor drive and power control. This electrically controllable switch controls the current flow path to two or more motor coils. This allows full control of the motor speed and direction. FZ1200R33KF2C is such a module which is widely used in different machineries and apparatuses.

A hybrid vehicle system consists of an electric motor, a battery and an inverter. An electric power conversion system is needed to supply electrical energy from the battery to the motor, and to store energy generated by the motor in the battery. The inverter is used as that power conversion system FZ1200R33KF2C is one of the most common modules to use as the main switching device in this electric power conversion system.

There are some specific motor control applications which FZ1200R33KF2C are most suitable for. These are brushed DC motor, brushless DC motor, induction motor, servo motor, stepper motor, switched reluctance motor, permanent magnet synchronous motor, Industrial automation etc.

Established in Houston, TX in 2001, Young & New Century LLC has been selling IGBT power transistor modules like FZ1200R33KF2C. Our company specializes in selling electronic components of various manufacturers for a whole range of your industrial applications. Please take a look at our website uscomponent.com. You can send a request for quote for you required part. You can send your RFQ via an email also to Sales@uscomponent.com

About the Author: David Smith, Senior Vice President of


, an IGBT power transistor module distributor since 2001



Permanent Link: